TAC HRTAC HR
Two Work Periods in One Day: How Lateness and Partial Absence Are Calculated
Attendance, work periods and field reps

Two Work Periods in One Day: How Lateness and Partial Absence Are Calculated

Two periods in one day: a restaurant example of how lateness, early departure and partial absence are counted per period, and why the gap is not overtime.

5 min read

In a split shift, lateness, early departure and partial absence are calculated for each period separately, and the results are added up for the day. The break between the two periods is not actual working time, so it does not enter overtime. What counts as overtime is time beyond the scheduled hours, under Article 107 of the Saudi Labor Law.

What is a split shift?

It is a day in which an employee has two periods separated by a gap when they leave the workplace or rest, as in restaurants, cafes and retail shops that peak in the morning and the evening. The operational problem is that a system that assumes one period per day either reads the lunch gap as an absence, or reads the long stretch from morning to night as one day and counts the break as work.

How does the system handle two periods?

TAC HR supports more than one work period per employee and calculates lateness, early departure and partial absence, so each period's check-in and check-out are compared with that period's own time. Lateness in the second period is not hidden by arriving on time in the first, and missing the whole second period is a partial absence, not a day's absence.

Worked example for a restaurant

Two periods: the first from 12:00 to 16:00 and the second from 19:00 to 23:00. The monthly wage is SAR 4,800, so the hourly wage under the MHRSD awareness guide is 4,800 ÷ 30 ÷ 8 = SAR 20.

Scheduled working hours: 4 + 4 = 8 hours. The time between the first and last punch is 11 hours, but the 3-hour gap is not counted as work.

One employee's punches in a day:

PeriodInOutStatus
First12:2016:0020 minutes late
Second19:1022:4010 minutes late and 20 minutes early departure

The calculation:

  1. Late minutes: 20 + 10 = 30 minutes.
  2. Early departure minutes: 20 minutes.
  3. Total: 50 minutes.
  4. If the company deducts pro rata from the hourly wage: 50 ÷ 60 × 20 = SAR 16.67 approximately.

If the company uses a penalty table for lateness and early departure, its table is applied to the same minutes, and it appears as a separate line item in payroll and on the payslip.

Second case: missing the second period

An employee attends the first period in full and does not attend the second.

  1. First period: 4 hours of full attendance.
  2. Second period: 4 hours absent, which is a partial absence, not a day's absence.
  3. Pro rata: 4 × 20 = SAR 80.

If a full day's absence had been recorded, about SAR 160 would be deducted for the eight hours. The difference between the two cases is SAR 80, which is what the employee loses or the company pays by mistake if the periods are not separated.

Why is the break not overtime?

Article 98 sets actual working hours at 8 hours a day on the daily standard, and Article 102 provides that rest, prayer and meal breaks are not part of actual working hours. Article 107 treats hours beyond the scheduled hours as overtime. So the gap between the two periods is not working time to be compared with the eight hours.

Article 101 sets two limits to consult when designing periods: an employee may not work more than 5 consecutive hours without a break of at least half an hour, and may not stay at the workplace more than 12 hours in a day. In the example above each period is 4 hours.

When does overtime actually appear?

If the employee stays after 23:00 until 23:30 at the manager's request, the half hour is beyond the scheduled period. If their actual wage equals their basic wage, the overtime hourly rate is 20 + 10 = SAR 30, so the half hour is SAR 15. It is submitted as an "overtime" request with an approval route. The calculation is detailed in the overtime guide.

Checklist for setting up a split shift

  1. Define the two periods with their times. Do not define one day with its eleven hours.
  2. Make sure no period exceeds 5 consecutive hours without a break.
  3. Decide who approves early departure and permission requests within a period.
  4. Assign the employee a punch location, because they punch four times a day.
  5. Set the penalties: pro rata or by table.
  6. Make overtime an approved request, not an inference from punches.
  7. Review the detailed attendance report before closing payroll.

Attendance in TAC HR

TAC HR supports more than one work period per employee, calculates lateness, early departure and partial absence, handles a period that crosses midnight, and feeds the result into monthly payroll. See the attendance service and solutions for restaurants.

Frequently asked questions

Is the gap between the two periods counted as work?

No. Article 102 provides that rest breaks are not part of actual working hours.

What is the longest continuous work stretch?

5 consecutive hours, then a break of at least half an hour, under Article 101.

Is missing one period a day's absence?

In TAC HR it is counted as a partial absence for that period, not a day's absence.

How is the hourly wage calculated?

Per the awareness guide: monthly wage ÷ 30 days ÷ 8 hours.

Can a period cross midnight?

Yes, TAC HR supports a work period that crosses midnight.

Show us how you work, and we'll show you the difference.

In the demo we walk through a full day in your company: the morning punch, a request, the month's payroll, and the rep in the field, on data like yours.