TAC HRTAC HR
A free calculator from the Developed Nitaqat 2026 procedural guide

Nitaqat Calculator and Saudization Percentage 2026

An establishment's band in the Nitaqat Mutawar program is set by comparing its Saudization percentage with four minimum thresholds, calculated for each activity and year by a logarithmic formula that takes the total of the workforce averages. Choose the activity and the year, enter the average counted Saudi workforce and the average expatriate workforce, and the tool shows the percentage, the four thresholds and the band.

employees

Each Saudi counts as one

employees

Band

Enter the data to see the result

How the result is calculated

The result appears once the required inputs are complete and valid, and the tool applies the same steps explained with a worked example in the calculation section.

Your inputs stay in your browser and are not sent anywhere.

How it is calculated

The formula, line by line

Under the procedural guide for the Developed Nitaqat program 2026 issued by the Ministry of Human Resources and Social Development, four minimum thresholds are calculated for each activity and year with a logarithmic formula, and the Saudization rate is compared with them. The coefficients for the 41 activities in the tool are copied cell by cell from Appendix 1 of the guide, printed pages 8 to 14, and the tool names your activity's page under the result.

The example in every line: an entity in general wholesale and retail, table year 2026, a total of Saudi workforce averages of 20, and foreign of 80.

01

Total workforce and its logarithm

The two averages added together, then the natural logarithm that enters every threshold formula. The guide defines foreign workers as those who are not GCC nationals.

s = Saudi workforce averages + foreign workforce averages

In the example: s = 20 + 80 = 100, and ln(100) = 4.6052

02

Saudization rate

The Saudi share of the total, as a percentage.

r = Saudi workforce averages ÷ s × 100

In the example: 20 ÷ 100 × 100 = 20%

03

Low Green threshold

m is the curve constant for each band and activity, and c is the Saudization constant for each band, activity and year. For general retail in 2026: m = 2.47 and c = 23.25.

t = m × ln(s) + c

In the example: 2.47 × 4.6052 + 23.25 = 34.62%

04

The three higher thresholds

The same formula with each band's coefficients: Medium Green m = 2.47 and c = 27.72, High Green m = 2.67 and c = 30.41, Platinum m = 2.84 and c = 38.91.

t for each band = band m × ln(s) + band c

In the example: Medium Green 39.09%, High Green 42.71% and Platinum 51.99%

05

The band

The rate is compared with the four thresholds from lowest to highest, and the band is the last threshold reached or equalled. Below the Low Green threshold is Red, and equalling a threshold moves you up because the guide's comparison is "greater than or equal to".

Rate rBand
Below the Low Green thresholdRed
From the Low Green threshold to below Medium GreenLow Green
From the Medium Green threshold to below High GreenMedium Green
From the High Green threshold to below PlatinumHigh Green
The Platinum threshold or abovePlatinum

Band = the highest band whose minimum threshold the rate reaches

In the example: 20% is below 34.62%, so the band is Red

06

Saudis needed for the next band

The tool adds one Saudi at a time while foreign workers stay the same, and reruns the same formula each time until the band rises. Adding raises the total s, which raises the threshold slightly too, so working out the gap once is not enough.

The smallest k such that: (Saudis + k) ÷ (s + k) × 100 ≥ t of the next band at (s + k)

In the example: 24 extra Saudis, giving 44 of 124 = 35.48%, above the new Low Green threshold of 35.16%

Limits of the tool

What this calculator does not cover

  • 01Working out the averages: the tool takes the totals as you enter them and does not calculate them from monthly counts or employees' periods of service.
  • 02Counting each employee: the 2026 procedural guide sets no special weights for counting a Saudi employee, and the tool counts every Saudi as one. If the Ministry's platforms show your establishment a counted total under other rules, enter it as shown.
  • 03Identifying the entity and activity: the guide defines the entity as the unit the Ministry deals with for Saudization, combining all branches of one establishment that practise the same economic activity. The tool does not know your entity or your activity classification, so choose it as registered.
  • 04The services, facilities and restrictions linked to each band are detailed in the procedural guide, and the tool does not show them.
  • 05The result is an estimate from the guide's formula; the official band is what the Ministry's platforms show for your entity.
Common questions

What to ask before relying on the result

  • By dividing Saudi workforce averages by the total of Saudi and foreign averages and multiplying by 100, under the Developed Nitaqat 2026 procedural guide.

  • The total stays 100, so the threshold stays 34.62%. With 35 Saudis and 65 foreign workers the rate is 35%, above the Low Green threshold and below the Medium Green threshold of 39.09%, so the band is Low Green. By adding alone, 24 Saudis are needed, as in the example.

  • The establishment moves to the higher band, since the guide's comparison is greater than or equal to.

  • Yes. The total workforce s is inside the logarithm, so the threshold changes with it, except in a band where m is zero and the threshold stays fixed.

  • Because the constants c differ between 2026, 2027 and 2028 for many activities. For example: a café with 12 Saudis and 28 foreign workers has a rate of 30%. The 2026 thresholds are 22.81%, 26.65%, 37.58% and 41.68%, and the 2027 thresholds are one point higher in each band: 23.81%, 27.65%, 38.58% and 42.68%. The result is Medium Green in both years.

  • Yes. It has the 41 activities in Appendix 1 of the guide, each with four bands and three years.

  • No. The calculation runs in your browser and the figures never leave your device.

Inside TAC HR

The share of Saudis among your employees before every hire

In TAC HR the "Hiring analytics" screen has a "Saudization impact" card: the current share of Saudis among your employees, and what it becomes if you hire a Saudi or a non-Saudi for the next vacancy. You see the effect of a hiring decision before you make it, then compare it with your activity's thresholds in this calculator.

The official band depends on the entity's activity and size and appears on the Qiwa platform; the system does not calculate it on Qiwa's behalf. The document archiving service tracks employee documents and their expiry dates, with alerts before IDs, iqamas and contracts expire. More on the program in Nitaqat.

  • Recruitment — A recruitment system that ranks applicants with written reasons and turns the accepted one into an employee file
  • Document archiving — Employee and company document archiving with expiry dates and a reminder before every renewal