TAC HRTAC HR
Field Reps Management Guide: Tracking, Zones and Visits
Practical guides

Field Reps Management Guide: Tracking, Zones and Visits

How to manage field sales reps in Saudi Arabia: field employee and seats, tracking consent, customers, visit geofences, zones, supervisor board and PDF reports.

Last updated9 min read

A rep in TAC HR is a regular employee with a full file, and field tracking is switched on with a toggle in that file. Once it is on, the rep works from the same app in rep mode, and you follow them on the Field Team screen: the live map, customers, visits, zones and reports. This guide takes you from seats to PDF reports. The admin web interface is in Arabic, so screen names are given in English.

Checklist before you start

  • The Rep Tracking service is in your subscription with enough seats for your reps.
  • An active mobile account for every rep, created from the employee's file.
  • A work shift assigned to every rep in their file. See the attendance setup guide.
  • Your customer list with names, cities and Google Maps location links.
  • Who will supervise the team, and the "Tracking settings" permission for whoever enables the module.

Steps

1. Enable the field team for the company

Under Field Teams Management open Field Team. If the module is off you see "The module is not enabled for your company", so click "Enable field team". Whoever holds the "Tracking settings" permission can enable it.

2. Turn an employee into a field employee

Open the employee file, go to Work and Attendance, then Settings, and under General Settings turn on "Field employee" and save. This toggle is the source of the role. You can also start from the Field Team itself: open the Reps tab, click "Add rep", pick the employee and click "Activate rep and link to employee". Only employees with an active mobile account appear.

Seats are limited. When they run out you see "Field tracking was not enabled: the rep tracking seats in your subscription are full". Stop another rep or ask for more seats from the subscription page.

3. Explain tracking consent to the rep

The app asks the rep to consent to location tracking during work before the field shift can start, and it does not start without it. Tracking begins with check-in and ends with check-out or when the rep switches it off. If the internet drops, the app keeps up to 3,000 points and sends them later. The rep's device binding is strict, and to move it open the rep's profile and click "Unbind device" in the Linked Device section.

4. Set the team settings

In Field Team open Settings:

  • Visit verification geofence: the maximum distance between the rep's location when they log a visit and the customer's location, from 20 to 2,000 meters. Beyond it the visit counts as "out of range".
  • Zone exit alert: the rep gets a notification on their device if they move more than 500 meters from their zone's boundary for more than 10 minutes during work.
  • Activity types: turn off what you do not need and add your own.
  • Required work hours: read from the rep's shift in their file, so it is not set here.

Then "Save settings".

5. Add customers

Open the Customers tab and click "Add customer". Enter the name, type (company, institution, individual or government), status, mobile, city, district and address. Paste the Google Maps location link and the address fields fill in automatically, so review them. Pick category A, B or C, then "Save customer".

Customers a rep adds from the field appear under "Awaiting review". Open each one and click "Approve" or "Reject".

6. Draw zones and assign them

Open the Zones tab and click "New zone". Click "Add points" and click the map at least three times to draw the boundary, then enter the zone name and color, and "Suggest" proposes the district from the location. Customers inside the boundary are counted automatically. Then assign it to one or more reps: the coverage period start and end, the recurrence of once or weekly (weekly needs an end date), and the priority. A zone with no rep is saved under "Zones with no assignment" and assigned later from its card.

Example: a zone holds 20 customers and the rep visited 14 of them during the assignment, so the zone's visit coverage is 70%. The board warns you about assignments whose window ends within 3 days with coverage under 50%.

When the rep finishes they request approval of the zone. You click "Approve" to freeze the coverage figures in the record, or "Return" with a note on what to complete.

7. Follow the team on the board and live map

Team Board is the supervisor's daily reference: who is on shift now, today's visits, distance, location match rate, customers awaiting review, open tasks and alerts. The Live Map shows rep positions, the selected rep's route with stops and customer visits, and customer and zone layers. Badges describe each rep: moving, in a visit, stopped, or signal lost.

8. Review visits

In Visits filter by period, status and rep. The table shows the rep, customer, entry, duration in minutes and result, with a "Matched" or "Out of range" mark and the distance from the customer. Click a visit to see its activities.

9. Print the reports

There are four PDF reports: "Export PDF" in Reports and Performance for the chosen period, "PDF" in Visits, "Export sheet" in a rep's profile for their attendance sheet, and "PDF" in the zone coverage report. The Rep Leaderboard shows each rep's visits, verified visits, activities, distance and work time in minutes.

Worked example: a rep's day with three visits

A rep started the field shift on Sunday 25 October 2026 at 09:00 and visited three customers. The app sends a tracking point every minute, the system cleans them, measures the distance and extracts the stops, and compares the distance from each visit's check-in location to the customer's location against the verification range. The examples are assumed, each figure is calculated by the field module's own functions, and a permanent test recomputes them.

VisitStop timeCheck-in distance from the customerVerdict at a 150 m range
Customer A26 minutes44 mInside the range
Customer B18 minutes189 mOutside the range
Customer C31 minutes89 mInside the range

What shows in the «Day summary»

  • Distance: 9.1 km on the cleaned route between the three stops.
  • Visits: 3 visits, with 75 minutes of stop time in them: 26 + 18 + 31.
  • Tracking time: 111 minutes, which is the 75 minutes of stops plus two trips between customers of 18 minutes each.

How a visit is judged: the system measures the distance between the rep's check-in point and the approved customer location, and if it exceeds the verification range, 150 m by default (set from 20 to 2000 m), the visit counts as «Outside the range». Customer B at 189 m is outside it, and had the range been set to 200 m it would be inside. The distance is recorded whenever the customer has a location, but a verdict is given only for an approved customer, and a fix with an accuracy worse than 150 m cannot confirm one.

Why the trip is not counted from a single point: the system drops the less accurate points and jumps faster than 160 km/h, and gathers stationary points into one stop if it lasts 4 minutes or more. So 26 minutes at customer A shows as one stop, not thousands of scattered points.

Common mistakes

  • Enabling a rep with no active mobile account. The toggle saves but no rep profile is created, so create the account and save again.
  • Seats are full. No new rep is enabled until you stop one or add seats.
  • Setting work hours on the field screen. Hours come from the rep's shift in their file, and lateness and absence are counted from it.
  • A visit geofence that is too tight. It raises the number of "out of range" visits, so set it to suit your customers' sites.
  • A zone with fewer than three points. It cannot be saved.
  • Weekly recurrence with no end date. The system asks for the end date.
  • Expecting offline punches. Only rep tracking stores points and sends them later. A punch always needs a connection.

After setup

Read how to follow visits in tracking rep visits and tracking reps without phone calls, and the supervisor's role in the field supervisor dashboard. Internal attendance is set in the attendance guide, and working days flow into the payroll run. The product pages are rep tracking and field attendance, and the other guides are in the guides hub.

Product link

The Rep Tracking service in TAC HR offers a live map, routes, geofences, customer visits with a verification range from 20 to 2,000 meters, customer accounts and contacts, and a supervisor board. See Rep Tracking.

Frequently asked questions

Is a rep a regular employee in the system?

Yes. They have a full employee file, attendance, leave and salary, and field tracking is switched on with a toggle in their file.

Is the rep tracked outside work hours?

No. Tracking begins with check-in and ends with check-out or when the rep switches it off, and the rep consents to location tracking during work before starting.

What if the internet drops during a visit?

The app stores up to 3,000 tracking points and sends them when the connection returns. If the phone stops tracking, a silent notification from the system restarts it.

How do I know the rep really visited the customer?

A visit records entry and exit with location and photos, and it is compared with the customer's location inside the verification geofence you set, showing "Matched" or "Out of range" with the distance.

How do I move a rep to a new phone?

Open the rep's profile and click "Unbind device", and the next phone they sign in from is bound.

Show us how you work, and we'll show you the difference.

In the demo we walk through a full day in your company: the morning punch, a request, the month's payroll, and the rep in the field, on data like yours.