TAC HRTAC HR
A scene from a Saudi workplace
HR templates

Job Description: Electrician

Use this description for someone who specializes in electrical wiring, panels and loads inside buildings or sites. If you want a person who handles varied faults at a basic level, write the general maintenance technician description instead. Keep the duties as wide as your company needs, and leave out what you hand to a licensed contractor.

Last reviewed
On this page

01When to use the electrician job description, and who uses it

A maintenance supervisor at a residential compound, hospital or factory uses this description when the facility needs an electrician for its panels, wiring and faults, and a site engineer at a contractor uses it when hiring an electrician for fit-out work. HR needs it for the contract and for verifying professional accreditation before the start date.

It is reopened when loads increase, or a standby generator or solar panels are added, changing what the electrician handles and what goes to a licensed contractor; or when the company adopts a permit-to-work system for hazardous jobs, making the permit a condition before every task.

02The electrician job description

Copy the whole text, then delete what does not apply; the electrician's duties fall into 5 groups: Wiring and installation, Fault finding, Routine maintenance, Electrical safety and Documentation.

[Company name]
Job Description

Job title: Electrician
Department: Maintenance / Electrical
Reports to: Maintenance Supervisor / Site Engineer
Work location: [building or site]
Work pattern: [full-time / by the work-period schedule]
Issue date: [date]      Version: [number]

Job summary
The electrician carries out wiring, installation and upkeep of networks, panels and lighting, finds and fixes faults, follows isolation and safety procedures and documents the work.

Duties and responsibilities
1) Wiring and installation
   - Carry out lighting and socket wiring to the approved drawings.
   - Install breakers, sub-panels, switches and fittings.
   - Check the connection and wire insulation before power is restored.
2) Fault finding
   - Find the cause of an outage, an overload or a short.
   - Measure voltage, current and insulation with the right instruments.
   - Fix the fault or recommend a replacement if it is beyond the role.
3) Routine maintenance
   - Inspect electrical panels and earthing at set intervals.
   - Replace lamps and their accessories per the schedule.
   - Clean panels, tighten connections and record their condition.
4) Electrical safety
   - Isolate and lock off power and hang a sign before any work.
   - Use insulated gloves, boots, glasses and insulated tools.
   - Never work on live panels without the supervisor permission and procedure.
5) Documentation
   - Record each job, its place and what was fitted.
   - Update the panel diagram after any change.
   - Order missing materials and parts and follow them up.

Suggested performance indicators
- Response time to electrical faults by priority.
- Routine panel inspection done on time.
- The same fault not returning after repair.
- Completeness of work records and panel diagrams.
- An injury-free and incident-free record at work.

Qualifications and experience
- Electrical diploma, industrial secondary or equivalent [if required].
- At least [__] years in wiring or electrical maintenance [if required].
- Electrical safety certificate or course [if required].

Skills required
- Reading electrical drawings.
- Using measuring instruments.
- Methodical fault diagnosis.
- Strict isolation discipline.
- Working in a team with the supervisor and technicians.

Working conditions
- Work location: [sites], moving between buildings.
- Hazards: working near live voltage, at height and in tight spaces.
- Equipment: insulated tools and measuring instruments in the electrician custody.

Approval
[Approver name and job title]      Signature: ________      Date: [date]

Job holder acknowledgment
I have read the electrician description above and confirm I understand its duties.
Name: [employee name]      Signature: ________      Date: [date]

03The electrician description, clause by clause

Wiring and installation: to drawing and specification

The electrician installs to the approved drawing and material specification, and does not change a cable size or breaker because a substitute is to hand. Every change to the wiring is recorded so the next person knows what is behind the wall.

Fault finding: cause before replacement

Replacing a breaker that trips without finding why hides the problem. The description has the electrician look for the cause, overload or short circuit, and record it.

Planned maintenance: a schedule for panels and generators

Inspecting panels, tightening connections and testing the standby generator on written dates; a fault prevented is cheaper than one repaired on the busiest night.

Electrical safety: isolate and lock

Isolating and locking out the supply with a lock and tag before work, wearing protective equipment, and never working on a live circuit except as the permit and training allow. This is the most important clause in the description.

Records and qualifications

A log of completed work and updated drawings after any change. The qualification is an electrical diploma or trade certificate, and any professional accreditation your sector's regulator requires is verified before it is written in as a requirement.

Approval at the end of the template

The electrician description ends with the approver's name, title, signature and date, so when duties change a new version is issued with a new number instead of handwritten edits.

04Interview questions that test the electrician description

  • 01A breaker trips every evening at the same time. How do you investigate? Links the timing to the loads running then, measures current and checks connections before replacing anything.
  • 02What are your steps before working on a panel? A permit if there is one, isolation and lock-out with a tag, a check for zero voltage, then the work.
  • 03A manager wants an extra socket right now with no drawing. What do you do? Checks the circuit load and records the change, and does not add to a loaded circuit.

05A filled-in example: a maintenance electrician at a private hospital in Riyadh

A private hospital in Riyadh hires a non-Saudi electrician reporting to the maintenance supervisor, working rotating periods because the hospital never stops. The hospital wrote that medium-voltage work and the main generator panels belong to a licensed contractor, while the electrician handles low voltage inside departments under a permit to work, and estimated sixteen hours of overtime a month for night faults.

FieldIn the example
CompanyA 120-bed private hospital
CityRiyadh
Work periodRotating: morning or evening
Start date2026-11-29
NationalityNon-Saudi
Basic salarySAR 4,500.00
Housing allowanceSAR 1,125.00
Transport allowanceSAR 450.00
Total monthly salarySAR 6,075.00

What these inputs mean for the electrician, using the functions of the overtime calculator, the GOSI calculator, the leave calculator and the end-of-service calculator:

CalculationResultBasis
End of probation (90 days)2027-02-26the start date counts as day one
Actual hourly wageSAR 25.31(basic + allowances) ÷ 30 ÷ 8 hours
Overtime hourly rateSAR 34.69actual hourly wage + 50% of the basic hourly wage
Pay for 16 overtime hoursSAR 555.00overtime rate × hours
Employee GOSI share per monthSAR 0.00nothing is deducted from a non-Saudi employee
Employer GOSI share per monthSAR 112.502% of the contributory wage
End-of-service award if the contract ends at term after two yearsSAR 6,075.00half a month's wage per year for the first five years, on the total of SAR 6,075.00 to 2028-11-28
Annual leave earned by the end of probation5.18 days21 days per year of service, pro rata

06Hard cases and common mistakes in a electrician description

A fault in a department that cannot lose power

Intensive care and theatres cannot be switched off like an office. Write in the description that work there follows a plan approved by the maintenance supervisor and the department, and may go to the contractor.

Work beyond the electrician's accreditation

If asked to work on higher voltage than the accreditation covers, the electrician declines and reports it. The description protects them when refusing work outside their competence.

A minor electrical injury

It is reported at once and checked medically even if it looks minor, and recorded. What follows a work injury is governed by GOSI regulations.

A contractor working on the same site

The electrician does not alter or accept the contractor's work on the company's behalf without instruction, and reports anything that looks non-compliant.

Common mistake: An electrician for everything

Loading the electrician with plumbing and air conditioning turns the job into general maintenance. If that is what you need, use the maintenance technician description.

Common mistake: Certificates nobody actually requires

Requiring an accreditation your regulator does not ask for narrows the field for nothing. Check, then write.

07Steps to adapt the electrician description to your company

  1. 1

    State the voltage level

    low or medium, since the duties and the permit differ.

  2. 2

    Write what goes to a contractor

    such as large loads or outside networks.

  3. 3

    Check required certificates

    with the regulator for your activity before you make them a condition.

  4. 4

    Link it to your permit-to-work system

    if your company uses a written permit for hazardous work.

08Electrician description checklist before approval

6 items

09Frequently asked questions

  • Do not make it a condition until you confirm it with an official body that regulates your activity. It is safer to list it as a plus or in square brackets.

  • The electrician specializes in wiring, panels and loads, while the maintenance technician handles varied faults.

  • Better not on live panels, so write that in the safety procedures.

  • With a work log holding the place, date and what changed, and an updated panel diagram.

  • In facilities that never stop, yes; write the shift or call-out system and how its hours are counted.

  • Usually the company, handed over as custody with an acknowledgment. Write that in the description or the custody policy.

  • No; vehicle electrics is a different trade with other duties and tools.

  • Not without written instruction. The maintenance supervisor may ask the electrician to inspect the work and comment before handover, while acceptance itself is a decision for whoever holds that authority in the company.

Related pages

Inside TAC HR

The electrician description in TAC HR

TAC HR follows the electrician work as tasks assigned in the task management service until completion, and records clock-ins from the mobile app after the geofence is checked in the attendance service, with several sites supported. The document archiving service keeps the technician papers in their file and alerts before documents such as residency expire. You will find other templates on the templates page.

Advertising a electrician role starts from "Posted jobs" («الوظائف المعلنة») → "New job" («وظيفة جديدة»): the "Duties and responsibilities" («المهام والمسؤوليات»), "Requirements" («المتطلبات») and "Benefits" («المزايا») fields in the "Job description" («الوصف الوظيفي») tab are filled from this template and published on the careers page. The electrician salary band is set once in "Job titles" («المسميات الوظيفية»), and the system counts and flags those outside it.

The electrician's first review in "Performance management" («إدارة الأداء») falls at the end of probation, on the indicators written here, with its date in the employee list under "End of probation" («نهاية فترة التجربة»).

  • Recruitment — A recruitment system that ranks applicants with written reasons and turns the accepted one into an employee file
  • Performance and development — A performance review system with weighted criteria and a result whose every point has a known source
  • Employee requests — An employee request system with an approval route per request type and a leave balance checked before approval