TAC HRTAC HR
A scene from a Saudi workplace
HR templates

Job Description: Maintenance Technician

Use this description for a general maintenance technician who handles faults in buildings and facilities across several trades: light electrical, plumbing, locks and finishing. If your work sits in a single trade, pick the closer description, such as the electrician, the plumber or the cooling technician. Edit it to your facilities and to what must go to a contractor.

Last reviewed
On this page

01When to use the maintenance technician job description, and who uses it

A facilities manager at a residential compound, school or office building uses this description when they need a technician for varied daily faults: a blown lamp, a leaking tap, a lock that will not work, a door that needs adjusting. HR uses it in the contract, and the supervisor reviews the technician on request closing time and keeping to the planned maintenance schedule.

It is reopened when the building grows and needs specialist technicians instead of one generalist, when part of the work goes to a contractor so the technician monitors it, or when an online request system replaces verbal requests.

02The maintenance technician job description

The template groups the maintenance technician's work under 5 headings, Answering fault calls, Routine maintenance, Repair and installation, Tools and stock and Safety and records, followed by how the job is measured, who suits it and where it is done.

[Company name]
Job Description

Job title: Maintenance Technician
Department: Maintenance / Facilities
Reports to: Maintenance Supervisor / Facilities Manager
Work location: [building or sites], moving between facilities
Work pattern: [full-time / by the work-period schedule]
Issue date: [date]      Version: [number]

Job summary
The maintenance technician inspects the company facilities and repairs their general faults, carries out routine maintenance, answers staff fault calls and records the work done, following the safety instructions.

Duties and responsibilities
1) Answering fault calls
   - Receive fault calls and rank them by priority.
   - Inspect the fault and estimate the time and parts it needs.
   - Close the call after the work and tell the person who raised it.
2) Routine maintenance
   - Carry out the routine inspection schedule for facilities and fittings.
   - Check lighting, locks, doors and visible wiring and fix what is needed.
   - Clean and lubricate equipment as the plan sets.
3) Repair and installation
   - Fix minor faults in electrical, plumbing, carpentry and paint.
   - Install fittings and replace worn parts.
   - Tell the supervisor what needs a specialist or contractor.
4) Tools and stock
   - Look after the work tools and return them after use.
   - Ask for missing parts and materials and record what is used.
5) Safety and records
   - Use personal protective equipment on every job.
   - Isolate power or water before work and hang a warning sign when needed.
   - Record each job with its date, place and what was replaced in the maintenance log.

Suggested performance indicators
- Response time to fault calls by priority.
- Routine maintenance schedule done on time.
- Same fault returning after the call was closed.
- A log that shows each call and its fix.
- Following safety instructions.

Qualifications and experience
- High school or a technical diploma [if required].
- At least [__] years in building maintenance [if required].
- A specialist certificate or course [if required].

Skills required
- Inspecting faults and finding the cause.
- Using hand and power tools.
- Reading simple drawings.
- Managing time across several calls.
- Keeping to safety procedures.

Working conditions
- Work location: [sites], moving between buildings.
- Physical effort: working on ladders, carrying equipment and in tight spaces.
- Equipment: company tools in the technician custody.

Approval
[Approver name and job title]      Signature: ________      Date: [date]

Job holder acknowledgment
I have read the maintenance technician description above and confirm I understand its duties.
Name: [employee name]      Signature: ________      Date: [date]

03The maintenance technician description, clause by clause

Responding to requests: written priorities

The technician responds to requests by written priority: anything affecting safety or stopping work comes first, such as water leaking onto electrics or an emergency door that will not open. A request is closed by recording what was done, not by the word “done”.

Planned maintenance: a schedule that gets done

Weekly and monthly checks of facilities on a schedule: lighting, emergency exits, leaks and locks. The schedule stops maintenance from being only a reaction to breakdowns.

Repair and installation: within the trade

The technician carries out basic repairs in light electrics, plumbing, carpentry and locks, and anything beyond that goes to a specialist or contractor. The description prevents the technician being given work they cannot do well.

Tools and stock: custody and counts

Tools are custody with an acknowledgment, and small spare parts sit in a stock the technician counts and reorders. The log shows what was used on each request.

Safety, records and qualifications

Isolating electricity before work, the right ladder and protective equipment, and warning signs. The qualification is a diploma or trade certificate and experience in general maintenance.

Approval and signature

The maintenance technician description is neither published nor attached to the contract before the approver signs and dates it, because the signed version is the reference in reviews and in any dispute about duties.

04Interview questions that test the maintenance technician description

  • 01Two requests: a water leak in a corridor and a dead light in an office. Which first? The leak if it is near electrics or a slip hazard, then the light, telling the second requester when to expect it.
  • 02An electrical fault beyond your experience. What do you do? Makes the area safe and tells the supervisor to call a specialist electrician, without experimenting.
  • 03How do you prove you completed the monthly maintenance schedule? A signed log with date, place and remarks, with photos where needed.

05A filled-in example: a maintenance technician for a residential compound in Dammam

A residential compound in Dammam hires a non-Saudi maintenance technician reporting to the facilities manager. The compound wrote that the technician handles light electrics, plumbing and locks, that central air conditioning and lifts belong to contractors, that requests arrive through an online system with their priorities, and that the technician has on-call duty for emergencies. It estimated fourteen hours of overtime a month.

FieldIn the example
CompanyA residential compound with 120 units
CityDammam
Work periodMorning, 7:00 am to 3:00 pm with on-call cover
Start date2026-11-15
NationalityNon-Saudi
Basic salarySAR 4,000.00
Housing allowanceSAR 1,000.00
Transport allowanceSAR 400.00
Total monthly salarySAR 5,400.00

These inputs give the following maintenance technician figures, worked out with the same functions as the leave calculator, the end-of-service calculator, the overtime calculator and the GOSI calculator on our site:

CalculationResultBasis
End of probation (90 days)2027-02-12the start date counts as day one
Actual hourly wageSAR 22.50(basic + allowances) ÷ 30 ÷ 8 hours
Overtime hourly rateSAR 30.83actual hourly wage + 50% of the basic hourly wage
Pay for 14 overtime hoursSAR 431.67overtime rate × hours
Employee GOSI share per monthSAR 0.00nothing is deducted from a non-Saudi employee
Employer GOSI share per monthSAR 100.002% of the contributory wage
End-of-service award if the contract ends at term after two yearsSAR 5,400.00half a month's wage per year for the first five years, on the total of SAR 5,400.00 to 2028-11-14
Annual leave earned by the end of probation5.18 days21 days per year of service, pro rata

06Hard cases and common mistakes in a maintenance technician description

A resident asks for a repair outside the compound's scope

Repairs inside a unit that the compound contract does not cover go through management to decide whether they are done and who pays; the technician makes no direct deal.

A spare part is unavailable and the fault is urgent

The technician makes the situation safe temporarily, orders the part and tells the requester when to expect it.

A contractor's work is below standard

The technician records the issue with photos and passes it to the facilities manager, without redoing the contractor's work personally.

Repeated night call-outs

Call-out time is counted under the contract and the Labor Law, so write how it is calculated in the description or policy.

Common mistake: A generalist for everything

Giving the technician lifts and central air conditioning is dangerous; these belong to specialists and contractors.

Common mistake: Verbal requests

Without logging, closing time and repeats are unknown.

07Steps to adapt the maintenance technician description to your company

  1. 1

    Define the trades done in-house

    and what goes to a contractor, so the person is not loaded with what they cannot do.

  2. 2

    Write only the certificates your sector needs

    and check them with the regulator for your activity before requiring them.

  3. 3

    Add a priority guide

    what counts as an emergency and what can wait.

  4. 4

    Tie it to tool custody

    who receives the tools and who counts them.

08Maintenance technician description checklist before approval

6 items

09Frequently asked questions

  • The general technician handles varied faults at a basic level, while the electrician specializes in wiring, panels and loads.

  • State it under working conditions if so, and keep safety instructions in the safety policy.

  • With a system that records each call, its status and who closed it, even a simple sheet.

  • Do not require it until you confirm with the official body that your activity needs it, and list it as a plus if not confirmed.

  • If required, with fall protection equipment and training, written under working conditions.

  • With a request system or log showing when each was received and closed and what was done.

  • Check what your sector's regulator requires and make the rest an advantage.

  • The technician requests them and suggests suppliers, while buying goes through procurement under the policy.

  • On closing time for each priority, the share of repeat requests, and keeping to the planned schedule.

Related pages

Inside TAC HR

The maintenance technician description in TAC HR

Each fault call can become a task in the task management service with an owner and a status until it is closed. The technician punches in through the phone, with the location checked in the system, in the attendance service, which handles several sites. For a round of scattered buildings, the field sales tracking service records the route when the technician has consented. Browse the remaining descriptions and policies on the templates page.

To post a maintenance technician vacancy, open "Posted jobs" («الوظائف المعلنة»), then "New job" («وظيفة جديدة»), and move the duties, requirements and benefits from this description into the "Job description" («الوصف الوظيفي») tab one item at a time, so they show on the company careers page. The maintenance technician salary band is set once in "Job titles" («المسميات الوظيفية»), and the system counts and flags those outside it.

The maintenance technician indicators written here are measured in the end-of-probation review in "Performance management" («إدارة الأداء»), and its date shows in the "End of probation" («نهاية فترة التجربة») column of the employee list.

  • Recruitment — A recruitment system that ranks applicants with written reasons and turns the accepted one into an employee file
  • Performance and development — A performance review system with weighted criteria and a result whose every point has a known source
  • Employee requests — An employee request system with an approval route per request type and a leave balance checked before approval