TAC HRTAC HR
A scene from a Saudi workplace
HR templates

Job Description: HVAC Technician

Use this description for someone who installs, services and repairs air conditioning and cooling equipment in buildings, at sites or at customer premises. It is narrower than the general maintenance technician and deeper in compressors, pipework and refrigerants. If you serve customers at their homes or shops, make the field part clear.

Last reviewed
On this page

01When to use the HVAC technician job description, and who uses it

A maintenance supervisor at a mall, hospital or hotel uses this description when they need a technician for central and split air conditioning and cold rooms, and a maintenance services company uses it when hiring a technician to serve customers in homes and shops. HR uses it in the contract and when checking the required certificates.

It is reopened almost every summer, because the season changes the schedule and on-call cover; when the company adds central cooling or food cold rooms, changing the experience needed; or when the work moves from in-house maintenance to customer visits.

02The HVAC technician job description

Copy the whole text, then delete what does not apply; the HVAC technician's duties fall into 5 groups: Installation and start-up, Routine service, Fault finding and repair, Safety and environment and Records and customer care.

[Company name]
Job Description

Job title: HVAC Technician
Department: Maintenance / Cooling and Air Conditioning
Reports to: Maintenance Supervisor
Work location: [building or customer sites]
Work pattern: [full-time / by the work-period schedule]
Issue date: [date]      Version: [number]

Job summary
The HVAC technician installs air conditioning and cooling units, services them and fixes their faults, checks compressors, pipework and refrigerant level, follows safety procedures and records every visit.

Duties and responsibilities
1) Installation and start-up
   - Install split, central and packaged units to the plan.
   - Run copper pipes, drainage and the unit electrical connections.
   - Test the unit after fitting and hand it over with a note on use.
2) Routine service
   - Clean filters, evaporators and condensers on schedule.
   - Check fans and motors and lubricate moving parts.
   - Check the thermostat and operating settings.
3) Fault finding and repair
   - Diagnose weak cooling, a stop or noise.
   - Trace and fix refrigerant leaks and recharge with the set amount and type.
   - Replace compressors, motors and electronic boards when needed.
4) Safety and environment
   - Handle refrigerants as the manufacturer guidance says.
   - Isolate power before any work on the unit.
   - Work carefully on roofs and at height with protective equipment.
5) Records and customer care
   - Log each visit: the unit, the fault and what was replaced.
   - Explain the fault and what it needs to the customer in plain words.
   - Order parts and refresh the tools stock.

Suggested performance indicators
- Response to fault calls by priority.
- Routine service done on time.
- The same fault returning after repair.
- Completeness of the visit log.
- Customer satisfaction on the company measure.

Qualifications and experience
- Industrial secondary or a diploma in cooling and air conditioning, or equivalent [if required].
- At least [__] years in air conditioning [if required].
- A course in handling refrigerants [if required].

Skills required
- Diagnosing compressor and circuit faults.
- Using pressure gauges and leak detectors.
- Reading appliance wiring diagrams.
- Working at height safely.
- A courteous manner with customers.

Working conditions
- Work location: [sites / at customers] with daily travel.
- Conditions: hot roofs, heights and heavy units.
- Tools: kit and measuring instruments in the technician custody.

Approval
[Approver name and job title]      Signature: ________      Date: [date]

Job holder acknowledgment
I have read the hvac technician description above and confirm I understand its duties.
Name: [employee name]      Signature: ________      Date: [date]

03The HVAC technician description, clause by clause

Installation and commissioning: to specification

Installing units according to the manufacturer's instructions and the project specification, commissioning them and recording their readings. The description has the technician hand over a unit with written readings, not just the word “working”.

Planned maintenance: filters before faults

Cleaning filters and condensers and checking pressures and drainage on a written schedule, because most summer breakdowns start from maintenance postponed in spring.

Fault finding and repair: measure before recharging

Recharging gas without finding the leak is a temporary fix that comes back within a week. The description has the technician measure, find the cause and record it.

Safety and environment: refrigerants and electricity

Handling refrigerants according to environmental requirements and never venting them, isolating power before work, and using fall protection on roofs.

Records, customer service and qualifications

A log for each unit of the work done, and a visit report signed by the customer for field work. The qualification is a diploma or trade certificate in HVAC, plus any refrigerant handling certificate the regulator requires.

The approval box

The HVAC technician description is signed by whoever approves the job structure, the department head or general manager, with an issue date so everyone knows which version applies when it changes.

04Interview questions that test the HVAC technician description

  • 01A unit cools poorly and the pressure is low. What are your steps? Finds and repairs the leak, evacuates, then recharges, recording readings before and after.
  • 02How would you organise maintenance of twenty units before summer? A schedule prioritising critical areas, with expected spare parts ordered in advance.
  • 03A customer at home asks for a repair outside the work order. What do you do? Refers back to the office for pricing and approval, and never agrees a side payment.

05A filled-in example: an HVAC technician for a service company in Al Ahsa

An air conditioning services company in Al Ahsa hires a non-Saudi technician reporting to the maintenance supervisor and visiting customers' homes and shops. The company wrote that proof of a visit is a report signed by the customer, that the technician takes no cash because payment goes through the office, and that summer is the on-call season. It estimated thirty hours of overtime a month from June to September.

FieldIn the example
CompanyAn air conditioning services company with twenty technicians
CityAl Ahsa
Work periodMorning, 7:00 am to 3:00 pm with field visits
Start date2027-02-01
NationalityNon-Saudi
Basic salarySAR 4,200.00
Housing allowanceSAR 1,050.00
Transport allowanceSAR 420.00
Total monthly salarySAR 5,670.00

Entering these HVAC technician numbers in the overtime calculator, the GOSI calculator, the leave calculator and the end-of-service calculator returns the same results:

CalculationResultBasis
End of probation (90 days)2027-05-01the start date counts as day one
Actual hourly wageSAR 23.63(basic + allowances) ÷ 30 ÷ 8 hours
Overtime hourly rateSAR 32.38actual hourly wage + 50% of the basic hourly wage
Pay for 30 overtime hoursSAR 971.25overtime rate × hours
Employee GOSI share per monthSAR 0.00nothing is deducted from a non-Saudi employee
Employer GOSI share per monthSAR 105.002% of the contributory wage
End-of-service award if the contract ends at term after two yearsSAR 5,670.00half a month's wage per year for the first five years, on the total of SAR 5,670.00 to 2029-01-31
Annual leave earned by the end of probation5.18 days21 days per year of service, pro rata

06Hard cases and common mistakes in a HVAC technician description

A food cold room fails at night

Write the call-out system for critical faults into the description, and that the technician tells whoever is responsible for the food to move it if the repair will take long, because the loss is in the goods, not the unit.

A spare part is not available

The technician tells the supervisor about available alternatives and timing, and does not fit a non-matching part just to close the job.

A customer is unhappy with the repair

The technician records the work and readings and passes the complaint to the office to decide on a second visit, without arguing with the customer.

Roof work in midday heat

Outdoor work is planned away from peak heat hours as the authorities set in summer, and this is written into the company's procedure.

Common mistake: An HVAC technician for all maintenance

Electrics and plumbing are other trades; for a general technician use the maintenance technician description.

Common mistake: A certificate requirement nobody checked

Check what the regulator requires for refrigerant handling before making it a requirement.

07Steps to adapt the HVAC technician description to your company

  1. 1

    Separate home from commercial work

    central cooling and large chillers need experience beyond a wall unit.

  2. 2

    Say whether the person serves customers

    if so, add visits, proof of them and dealing with invoices.

  3. 3

    Check refrigerant requirements

    with the regulator before you demand a course or certificate.

  4. 4

    Write the peak season

    summer changes the schedule and calls for extra cover.

08HVAC technician description checklist before approval

6 items

09Frequently asked questions

  • The HVAC technician specializes in compressors, refrigerants and their cycles, while the maintenance technician fixes general faults in a building.

  • List it as a plus or in square brackets until you confirm with the official body.

  • If so, say it, and log the visit by location so arrival and completion are shown.

  • With a work-period schedule that doubles cover and a call log that ranks priorities.

  • Usually the company, handed over as custody with an acknowledgment, including pressure and leak gauges.

  • If visits are made in a company vehicle, yes, and it goes under qualifications.

  • That depends on the company; if so, against a receipt or payment terminal with a daily handover.

  • On jobs closed on the first visit, keeping to the planned maintenance schedule, complete visit reports, and customer complaints.

Related pages

Inside TAC HR

The HVAC technician description in TAC HR

In TAC HR air conditioning calls are assigned as tasks in the task management service and followed to completion. The technician clocks in from the mobile app in the attendance service, and customer visits run as check-in and check-out visits with location and photos in the field sales tracking service once the technician agrees to tracking. Further templates wait on the templates page.

Advertising a HVAC technician role starts from "Posted jobs" («الوظائف المعلنة») → "New job" («وظيفة جديدة»): the "Duties and responsibilities" («المهام والمسؤوليات»), "Requirements" («المتطلبات») and "Benefits" («المزايا») fields in the "Job description" («الوصف الوظيفي») tab are filled from this template and published on the careers page. The HVAC technician's salary range is set in "Job titles" («المسميات الوظيفية»), which flags how many employees fall outside it.

After hiring, the "End of probation" («نهاية فترة التجربة») date shows in the employee list, and the first review in "Performance management" («إدارة الأداء») is the end-of-probation review, so the HVAC technician's indicators written here are measured before confirmation.

  • Recruitment — A recruitment system that ranks applicants with written reasons and turns the accepted one into an employee file
  • Performance and development — A performance review system with weighted criteria and a result whose every point has a known source
  • Employee requests — An employee request system with an approval route per request type and a leave balance checked before approval