TAC HRTAC HR
A scene from a Saudi workplace
HR templates

Job Description: Machine Operator

Use this description when you advertise for an operator who works on a specific machine in the plant. It is not the production supervisor, who leads the whole line, nor the quality inspector, who judges the product. Copy the text and edit the bracketed fields for your own machine.

Last reviewed
On this page

01When to use the machine operator job description, and who uses it

A production supervisor or plant manager uses this description when a particular machine needs an operator: a plastic injection machine, a water bottling line, a metal cutting machine or a food packing line. HR uses it in the contract and to check health certificates for a food plant, and the supervisor reviews the operator on output, waste and safety compliance.

It is reopened when the operator moves to another machine or a new machine with different instructions is added, when the plant moves to three work periods and handovers change, or when the operator is asked to do wider quality checks.

02The machine operator job description

Copy the whole text, then delete what does not apply; the machine operator's duties fall into 5 groups: Setting up the machine, Running and watching, Checking the product, Basic upkeep and cleaning and Safety and handover.

[Company name]
Job Description

Job title: Machine Operator
Department: Production
Reports to: Production Supervisor
Work location: [plant name and line]
Work pattern: [full-time / by the work-period schedule]
Issue date: [date]      Version: [number]

Job summary
The operator sets up their machine and runs it to the production order, watches its running and output, does basic upkeep, follows safety rules and hands the machine to whoever takes over.

Duties and responsibilities
1) Setting up the machine
   - Read the run order and load the required materials and tooling.
   - Check the machine before start-up and confirm the safety devices.
   - Set the machine parameters to the product specification.
2) Running and watching
   - Run the machine and feed it with material per the cycle.
   - Watch the product, sound, heat and gauges while it works.
   - Stop the machine at once on any unusual fault.
3) Checking the product
   - Check product samples by eye and by measure per line instructions.
   - Set aside defective pieces and tell the supervisor.
   - Log quantities made in the period record.
4) Basic upkeep and cleaning
   - Clean and lubricate the machine at the set times.
   - Report faults to maintenance and not try to fix what is beyond their remit.
   - Tidy the workstation at the end of the period.
5) Safety and handover
   - Wear protective equipment and follow lock-out steps before maintenance.
   - Hand the machine and notes to the next operator.

Suggested performance indicators
- Quantity made on their machine against what is required.
- Share of defective pieces coming from them.
- Keeping to basic upkeep and its schedule.
- Safety and attendance record.

Qualifications and experience
- Secondary school or a technical diploma.
- Experience running [machine type], scaled to its complexity: [__] years.
- Able to read run orders and simple drawings.

Skills required
- Focus and attention while running.
- Basics of the machine and routine upkeep.
- Following instructions and safety rules.
- Accurate measuring and logging.
- Stamina in a plant setting.

Working conditions
- Work on the plant floor with noise, heat and standing.
- Rotating work periods including nights: [____].
- Protective equipment: [supplied by the company and required on duty].

Approval
[Approver's name and job title]      Signature: ________      Date: [date]

Job holder acknowledgment
I have read the job description above and confirm that I understand it.
Name: [employee name]      Signature: ________      Date: [date]

03The machine operator description, clause by clause

Setting up the machine: to the work order

The operator sets up the machine to the work order and its instructions: the mould or settings, the raw materials, and a first piece checked before full production. A first piece out of specification stops the start rather than postponing it.

Running and monitoring: readings in the log

The operator watches the machine and logs its readings at written times, reporting any unusual noise or heat. The log shows when a drift began before it becomes a breakdown.

Checking the product: the first check, not the last

The operator checks samples with the specified tools and separates non-conforming items, while the final judgement belongs to the quality inspector. The description makes the operator the first line of defence, not the only one.

Basic maintenance and cleaning: what the manual allows

The cleaning, lubrication and daily checks set out in the machine manual are the operator's job; repair belongs to the maintenance technician. Going beyond that endangers the operator and the machine.

Safety, handover and qualifications

Protective equipment, isolation locks before any intervention, and never disabling safety guards. Handover between periods is logged. The qualification is experience on the same or a similar machine, plus a health certificate in food plants.

Approval and signature

The approval box makes the machine operator description an official company document rather than a draft: the approver's name, title, signature and date, with any later change issued under a new date.

04Interview questions that test the machine operator description

  • 01The first piece came out at a different size from the specification. What do you do? Stops, checks the settings, tells the supervisor, and does not start production until it conforms.
  • 02The safety guard slows the work down. Do you disable it? Never; the operator reports it if it gets in the way so it can be adjusted safely.
  • 03What do you write in the handover log for the next period? Machine condition, output, remarks, faults reported and remaining materials.

05A filled-in example: a bottling line operator at a water plant in Al Kharj

A water plant in Al Kharj hires a non-Saudi bottling line operator reporting to the production supervisor and working across three rotating periods. The plant wrote that a health certificate is required before starting, that the operator may stop the line for any safety risk or contamination, and that final product inspection belongs to the quality inspector. It estimated twenty-eight hours of overtime a month in summer.

FieldIn the example
CompanyA bottled water plant with three lines
CityAl Kharj
Work periodRotating over three work periods
Start date2026-12-27
NationalityNon-Saudi
Basic salarySAR 3,500.00
Housing allowanceSAR 875.00
Transport allowanceSAR 350.00
Total monthly salarySAR 4,725.00

The machine operator figures below come from the functions behind the overtime calculator, the leave calculator, the GOSI calculator and the end-of-service calculator; rerun them if you change the inputs:

CalculationResultBasis
End of probation (90 days)2027-03-26the start date counts as day one
Actual hourly wageSAR 19.69(basic + allowances) ÷ 30 ÷ 8 hours
Overtime hourly rateSAR 26.98actual hourly wage + 50% of the basic hourly wage
Pay for 28 overtime hoursSAR 755.42overtime rate × hours
Employee GOSI share per monthSAR 0.00nothing is deducted from a non-Saudi employee
Employer GOSI share per monthSAR 87.502% of the contributory wage
End-of-service award if the contract ends at term after two yearsSAR 4,725.00half a month's wage per year for the first five years, on the total of SAR 4,725.00 to 2028-12-26
Annual leave earned by the end of probation5.18 days21 days per year of service, pro rata

06Hard cases and common mistakes in a machine operator description

A breakdown mid-period

The operator stops and secures the machine, tells maintenance and the supervisor, and logs the time, attempting no repair beyond what the manual allows.

Pressure to run faster than usual

Raising speed beyond the instructions raises waste and the risk of injury. The operator keeps to the instructions and passes the request to the supervisor to decide.

A colleague injured at the next machine

The operator stops that machine if it can be done safely, calls first aid and tells the supervisor. What follows a work injury is governed by GOSI regulations.

Non-conforming raw materials

The operator tells quality and the warehouse and does not use them to finish the order.

Common mistake: One description for every machine

Name the machine; an injection operator's skills are not a cutting operator's.

Common mistake: Making the operator responsible for repairs

Repair belongs to the maintenance technician, with their training and authority.

07Steps to adapt the machine operator description to your company

  1. 1

    Name the machine plainly

    an injection operator's skills differ from a cutting or filling operator's.

  2. 2

    Attach the operating instructions

    and refer the operator to them rather than explaining in the description.

  3. 3

    Set stop authority

    and what they report against what they fix themselves.

  4. 4

    Add hygiene requirements

    if the plant makes food.

08Machine operator description checklist before approval

6 items

09Frequently asked questions

  • The operator works one machine; the supervisor leads the line and answers for quantity and the team.

  • They do basic upkeep only; anything beyond that goes to maintenance.

  • Yes. They are at the heart of the job where machines are involved.

  • By quantity, the share of defects, basic upkeep and safety.

  • If so, write which machines the operator has mastered and who decides on moving them.

  • Usually the production supervisor, on output, waste, safety compliance and handovers.

  • A health certificate in food plants, and whatever your activity requires for specific machines. Practical experience matters most.

  • If the plant runs in periods, write that under working conditions, with the rotation in the schedule.

  • Hours beyond those written in the contract, worked at the company's request, count as overtime; the method is in the example above.

Inside TAC HR

The machine operator description in TAC HR

TAC HR lets a production supervisor follow operators' clock-ins across their work periods in the attendance service, including a period that runs past midnight, keep their documents and iqamas with an alert before they expire in the document archiving service, hand out protective equipment and custody items with an acknowledgment from the phone, and take leave requests in the employee requests service. You will find other templates on the templates page.

This template fills the machine operator vacancy in the "New job" («وظيفة جديدة») screen: "Duties and responsibilities" («المهام والمسؤوليات»), then "Requirements" («المتطلبات»), then "Benefits" («المزايا») in the "Job description" («الوصف الوظيفي») tab, and the post reaches your careers page from "Posted jobs" («الوظائف المعلنة»). The salary range belongs in "Job titles" («المسميات الوظيفية»), where a machine operator salary outside it is saved with a warning.

Before the machine operator is confirmed, the end-of-probation review in "Performance management" («إدارة الأداء») runs on these indicators, on the date shown in the "End of probation" («نهاية فترة التجربة») column.

  • Recruitment — A recruitment system that ranks applicants with written reasons and turns the accepted one into an employee file
  • Performance and development — A performance review system with weighted criteria and a result whose every point has a known source
  • Employee requests — An employee request system with an approval route per request type and a leave balance checked before approval