TAC HRTAC HR
A scene from a Saudi workplace
HR templates

Job Description: Plumber

Use this description for someone who specializes in water and drainage networks and feed equipment inside buildings or sites. If you need a person who handles varied faults in a building, describe a maintenance technician instead. State the kind of networks you have: drinking water, sewage, or pumps and tanks.

Last reviewed
On this page

01When to use the plumber job description, and who uses it

A maintenance supervisor at a hospital, hotel, residential compound or factory uses this description when water and drainage faults multiply and need a specialist, and a site engineer at a contractor uses it when hiring a plumber for a project's installations. HR uses it in the contract, and the supervisor reviews the plumber on response time to leaks and the share of faults that do not recur.

It is reopened when tanks, pumps or an irrigation network are added, when part of the work, such as the main networks, goes to a contractor, or when working hours move to on-call cover in a facility that never stops.

02The plumber job description

Copy the whole text, then delete what does not apply; the plumber's duties fall into 5 groups: Pipework and fitting, Leaks and blockages, Pumps and tanks, Routine checks and Safety and records.

[Company name]
Job Description

Job title: Plumber
Department: Maintenance / Plumbing
Reports to: Maintenance Supervisor
Work location: [building or sites]
Work pattern: [full-time / by the work-period schedule]
Issue date: [date]      Version: [number]

Job summary
The plumber lays water and drainage pipework and fits sanitary ware and pumps, traces and fixes leaks and blockages, inspects the networks at set intervals, follows safety rules and records the work.

Duties and responsibilities
1) Pipework and fitting
   - Carry out water and drainage pipework to the approved drawing.
   - Fit sanitary ware, mixers and water heaters.
   - Pressure-test and leak-test after piping before hand-over.
2) Leaks and blockages
   - Find the source of a water leak or damp and fix it.
   - Clear blocked drains and sewers with the right equipment.
   - Inspect tanks and visible pipes and tell the supervisor what needs a contractor.
3) Pumps and tanks
   - Run water pumps and check their pressure.
   - Check tank floats and valves.
   - Follow tank levels and clean them on schedule.
4) Routine checks
   - Inspect networks, taps and basins at set intervals.
   - Replace worn parts such as seals and hoses.
   - Record the condition of each fitting after inspection.
5) Safety and records
   - Shut off the water and release pressure before taking anything apart.
   - Use gloves, glasses and waterproof boots.
   - Log each job with its date and place in the maintenance log.

Suggested performance indicators
- Response time to leak and blockage calls.
- Routine inspection done on time.
- Leaks not returning after repair.
- Every job entered in the log.
- Following safety instructions.

Qualifications and experience
- High school or a plumbing diploma [if required].
- At least [__] years in plumbing [if required].
- Knowledge of pipe types and fittings.

Skills required
- Joining and jointing pipes of various kinds.
- Reading plumbing drawings.
- Tracing leaks by inspection and measurement.
- Working in tight, damp spaces.
- Dealing well with the person who raised the call.

Working conditions
- Work location: [sites], moving between buildings.
- Physical effort: bending, carrying pipes and working in tight, damp spaces.
- Tools: plumbing kit in the worker custody.

Approval
[Approver name and job title]      Signature: ________      Date: [date]

Job holder acknowledgment
I have read the plumber description above and confirm I understand its duties.
Name: [employee name]      Signature: ________      Date: [date]

03The plumber description, clause by clause

Installation: the drawing and the right material

The plumber installs to the drawing and material specification and does not mix incompatible pipes because a substitute is to hand. Changes are recorded so the next person knows where the pipes run.

Finding leaks and blockages: the source, not the symptom

A stain on the ceiling is a symptom, and the source may be on the floor above. The description has the plumber find the source and close the right valve before repairing, and treat the cause of a blockage rather than where it appeared.

Pumps and tanks: running and cleaning

Operating and checking pumps, cleaning and disinfecting tanks on written dates, and checking floats and valves. An uncleaned tank can affect residents' health before it affects the pipes.

Planned maintenance: checked before it is reported

Checking taps, traps, drains and water heaters on a schedule, because a small leak caught early costs less than a ceiling repainted.

Safety, records and qualifications

Shutting off water and isolating electricity to heaters before work, caution with gases in inspection chambers, and protective equipment. The qualification is a trade certificate or documented plumbing experience, plus anything your sector's regulator requires.

The approval box

The plumber description ends with the approver's name, title, signature and date, so when duties change a new version is issued with a new number instead of handwritten edits.

04Interview questions that test the plumber description

  • 01A water stain on a room ceiling. How do you trace it? Identifies the pipework above, checks the bathroom or tank above, closes the valve and tests, before breaking anything open.
  • 02A kitchen drain blocks every week. What do you do? Finds the cause, such as grease or pipe fall, and proposes a permanent fix such as a grease trap.
  • 03How do you clean a roof tank? Drain, clean, disinfect with the specified product and contact time, rinse, and log the date.

05A filled-in example: a maintenance plumber at a hotel in Makkah

A hotel in Makkah hires a non-Saudi plumber reporting to the maintenance supervisor and working rotating periods because the hotel never stops. The hotel wrote that tanks are cleaned every six months on a schedule, that the main drainage network belongs to a contractor, and that response time to a leak in an occupied room is thirty minutes. It estimated sixteen hours of overtime a month in the Umrah and Hajj seasons.

FieldIn the example
CompanyA 300-room hotel
CityMakkah
Work periodRotating: morning or evening
Start date2026-11-08
NationalityNon-Saudi
Basic salarySAR 3,800.00
Housing allowanceSAR 950.00
Transport allowanceSAR 380.00
Total monthly salarySAR 5,130.00

What these inputs mean for the plumber, using the functions of the GOSI calculator, the end-of-service calculator, the overtime calculator and the leave calculator:

CalculationResultBasis
End of probation (90 days)2027-02-05the start date counts as day one
Actual hourly wageSAR 21.38(basic + allowances) ÷ 30 ÷ 8 hours
Overtime hourly rateSAR 29.29actual hourly wage + 50% of the basic hourly wage
Pay for 16 overtime hoursSAR 468.67overtime rate × hours
Employee GOSI share per monthSAR 0.00nothing is deducted from a non-Saudi employee
Employer GOSI share per monthSAR 95.002% of the contributory wage
End-of-service award if the contract ends at term after two yearsSAR 5,130.00half a month's wage per year for the first five years, on the total of SAR 5,130.00 to 2028-11-07
Annual leave earned by the end of probation5.18 days21 days per year of service, pro rata

06Hard cases and common mistakes in a plumber description

A leak in an occupied guest room

The plumber coordinates with reception to move the guest or enter the room in their presence, shuts off the source first and records the work. The description sets the response time for emergencies.

A leak reaching an electrical panel

Power to the area is isolated before any work and the electrician is called, because water and electricity together endanger life.

The main drainage contractor is late

The plumber makes the situation safe temporarily within their authority, records it and escalates to the supervisor.

A non-compliant part fitted earlier

The plumber reports it and proposes replacing it, rather than fixing the symptom on top of it.

Common mistake: A plumber for all maintenance

Adding electrics and air conditioning turns the job into a general maintenance technician's with a weaker specialism.

Common mistake: No response time

A leak in a warehouse that waits until tomorrow morning may ruin stock. Write the time.

07Steps to adapt the plumber description to your company

  1. 1

    Define the network type

    drinking water differs from sewage, and the methods differ.

  2. 2

    Say what goes to a contractor

    such as the main outside networks.

  3. 3

    Set the emergency response time

    for a leak in an office or warehouse.

  4. 4

    Add coordination with other trades

    if a leak reaches wiring or ceilings.

08Plumber description checklist before approval

6 items

09Frequently asked questions

  • The plumber specializes in water and drainage, while the maintenance technician covers several trades at a basic level.

  • Write it only if your company owns the network; otherwise it belongs to the responsible body.

  • Do not require it until you confirm with an official body, and list it as a plus.

  • With a log noting when the call came, the place and who fixed it, so you can measure the response.

  • Usually the company, handed over as custody with an acknowledgment, including leak detection equipment where there is any.

  • In facilities that never stop, yes; write the call-out system and how hours are counted.

  • Usually in small facilities; in large ones it goes to a specialist company that the plumber supervises.

  • Through a request system logging receipt, closure and work done, and a signed planned maintenance schedule.

  • On emergency response time, the share of repeat faults, and keeping to the tank and maintenance schedules.

Related pages

Inside TAC HR

The plumber description in TAC HR

A plumbing job reaches the plumber in TAC HR as a task that stays open in the task management service until someone marks it done. Attendance comes from the plumber phone and is checked against the site zone in the attendance service. Across scattered sites, the field sales tracking service can show the route once the plumber has agreed to it. More ready templates are on the templates page.

When you advertise a plumber post, copy this description into the "New job" («وظيفة جديدة») screen under "Posted jobs" («الوظائف المعلنة»): its "Job description" («الوصف الوظيفي») tab takes the "Duties and responsibilities" («المهام والمسؤوليات»), "Requirements" («المتطلبات») and "Benefits" («المزايا») item by item, and the post appears on your careers page. The salary range belongs in "Job titles" («المسميات الوظيفية»), where a plumber salary outside it is saved with a warning.

Once the plumber starts, the first review in "Performance management" («إدارة الأداء») is the end-of-probation review, using these indicators, due on the date in the "End of probation" («نهاية فترة التجربة») column.

  • Recruitment — A recruitment system that ranks applicants with written reasons and turns the accepted one into an employee file
  • Performance and development — A performance review system with weighted criteria and a result whose every point has a known source
  • Employee requests — An employee request system with an approval route per request type and a leave balance checked before approval