TAC HRTAC HR
A scene from a Saudi workplace
HR templates

Job Description: Safety and Occupational Health Officer

Use this description for someone who holds the safety and occupational health file in the company or on a site: spots risks, inspects, trains and investigates incidents. On project sites the role works beside the site engineer without following the execution schedule. Write what fits your activity, and check the official requirements for the job before you demand a particular certificate.

Last reviewed
On this page

01When to use the safety officer job description, and who uses it

A project or operations manager writes this description for a construction site, factory or large warehouse when the company needs someone to hold the occupational safety and health file independently of production pressure. HR uses it in the contract and to check the required certificate, and the manager reviews the officer on inspection results, incident rates and training completion.

It is reopened when a new project starts with different risks, when the number of contractors on site grows, or when the company adopts a permit-to-work system for hazardous jobs and the officer becomes its issuer or reviewer.

02The safety officer job description

This text sets out the safety officer's duties in 5 groups, Risk assessment, Inspection and follow-up, Training and awareness, Incidents and emergencies and Reports and coordination, then the performance indicators, qualifications, skills and working conditions.

[Company name]
Job Description

Job title: Safety and Occupational Health Officer
Department: Safety and Occupational Health
Reports to: Operations Manager / Project Manager
Work location: [head office and sites]
Work pattern: [full-time]
Issue date: [date]      Version: [number]

Job summary
The safety and occupational health officer sets the basics that protect workers from injury and occupational illness, inspects and follows breaches, trains the teams, investigates incidents and gives management recommendations.

Duties and responsibilities
1) Risk assessment
   - Identify the risks in each activity and site and record them.
   - Propose preventive measures and rank priorities.
   - Update the assessment when the work or the equipment changes.
2) Inspection and follow-up
   - Carry out regular inspection rounds of sites, equipment and storage areas.
   - Record breaches, tell the person responsible and follow their closure.
   - Check protective equipment, fire extinguishers and emergency exits are fit for use.
3) Training and awareness
   - Prepare a safety induction for new workers before they start.
   - Hold short regular safety talks with the teams.
   - Put up guidance boards in suitable places.
4) Incidents and emergencies
   - Receive reports of incidents and injuries and look into their causes.
   - Prepare the emergency and evacuation plan and run drills on it.
   - File a report on each incident with a recommendation to stop it recurring.
5) Reports and coordination
   - Prepare a monthly report on indicators, breaches and actions.
   - Coordinate with official bodies and contractors when needed.
   - Review safety requirements when signing a new contractor.

Suggested performance indicators
- Inspection rounds completed on time.
- Speed in closing recorded breaches.
- Share of workers who completed the induction.
- Fewer repeat incidents from the same cause.
- Completeness of incident reports and their recommendations.

Qualifications and experience
- Bachelor degree or diploma in safety, engineering or what fits your activity [if required].
- At least [__] years in safety [if required].
- A recognized occupational safety certificate [if required and after checking the requirement].

Skills required
- Assessing risk and writing procedures.
- Giving clear safety talks.
- Investigating incidents and finding root causes.
- Firm yet courteous in handling breaches.
- Precise reporting.

Working conditions
- Work location: [head office] with field inspection rounds.
- Conditions: work at sites that may include noise, dust and heights.
- Readiness: responding to emergency calls when they happen.

Approval
[Approver name and job title]      Signature: ________      Date: [date]

Job holder acknowledgment
I have read the safety and occupational health officer description above and confirm I understand its duties.
Name: [employee name]      Signature: ________      Date: [date]

03The safety officer description, clause by clause

Risk assessment: before work starts

The officer identifies the risks of each activity before it begins and proposes controls, updating the assessment when the work changes. The written assessment is what every inspection and incident refers back to.

Inspection and follow-up: written rounds

Inspection rounds on a schedule with a checklist, findings logged and assigned to whoever will fix them by a date, and followed until closed. A finding that is not followed up recurs.

Training and awareness: before entry

Induction training for everyone new to the site, short regular toolbox talks, and specific training for hazardous work. The record shows who was trained on what and when.

Incidents and emergencies: investigation, not blame

Investigating incidents and near misses to find the root cause, and the emergency and evacuation plan with its drills. The description encourages reporting near misses rather than punishing it.

Reports, coordination and qualifications

A monthly report of indicators and open findings, and coordination with contractors on site. The qualification is an occupational safety certificate whose requirement the company checks with its sector regulator, and experience in a similar sector.

Approval at the end of the template

The safety officer description ends with the approver's name, title, signature and date, so when duties change a new version is issued with a new number instead of handwritten edits.

04Interview questions that test the safety officer description

  • 01You see a worker on scaffolding without a harness. What do you do? Stops the work safely at once, corrects the situation, records it and looks at why it was missed.
  • 02The project manager pushes to start work before the permit is complete. How do you respond? Explains the risks, does not sign an incomplete permit, and escalates to whoever holds the decision if needed.
  • 03How do you investigate a minor fall with no injury? Records it as a near miss, finds the cause, proposes an action and thanks the person who reported it.

05A filled-in example: a safety officer on a construction project in Riyadh

A contractor in Riyadh hires a Saudi safety officer for an office tower project, reporting administratively to the project manager and technically to the company's safety manager, with earlier work registered before July 2024, so the previous GOSI system applies. The company wrote that the officer may stop any hazardous work at once and escalate within an hour, that induction for newcomers is compulsory, and that subcontractors follow the officer's instructions. It estimated twelve hours of overtime a month for night concrete pours.

FieldIn the example
CompanyA contractor building an office tower
CityRiyadh
Work periodMorning, 6:00 am to 3:00 pm with an hour's break
Start date2026-11-29
NationalitySaudi
Basic salarySAR 8,000.00
Housing allowanceSAR 2,000.00
Transport allowanceSAR 800.00
Total monthly salarySAR 10,800.00

Entering these safety officer numbers in the end-of-service calculator, the leave calculator, the GOSI calculator and the overtime calculator returns the same results:

CalculationResultBasis
End of probation (90 days)2027-02-26the start date counts as day one
Actual hourly wageSAR 45.00(basic + allowances) ÷ 30 ÷ 8 hours
Overtime hourly rateSAR 61.67actual hourly wage + 50% of the basic hourly wage
Pay for 12 overtime hoursSAR 740.00overtime rate × hours
Employee GOSI share per monthSAR 975.00previous system, employee rate 9.75% of SAR 10,000.00
Employer GOSI share per monthSAR 1,175.0011.75% of the contributory wage
End-of-service award if the contract ends at term after two yearsSAR 10,800.00half a month's wage per year for the first five years, on the total of SAR 10,800.00 to 2028-11-28
Annual leave earned by the end of probation5.18 days21 days per year of service, pro rata

06Hard cases and common mistakes in a safety officer description

Midday work in summer

The officer plans exposed work away from peak heat hours as the authorities set in summer, and follows up on water and rest breaks.

A subcontractor refuses instructions

The officer stops the hazardous work and escalates to the project manager to apply the contract terms with the subcontractor.

An injury needing hospital transfer

The officer follows the emergency plan, secures the scene, records it and notifies the required parties. What follows a work injury is governed by GOSI regulations.

A clash between the project schedule and safety

The description makes the officer independent on safety decisions; the schedule is rearranged, not the other way round.

Common mistake: A safety officer reporting only to production

Reporting to whoever pushes the schedule weakens the officer's decisions. Link the role technically to a higher level.

Common mistake: A certificate requirement nobody checked

Check with your sector's regulator before requiring a particular certificate.

07Steps to adapt the safety officer description to your company

  1. 1

    Tie it to your activity

    the risks of a warehouse differ from those of a factory or a building site.

  2. 2

    Make the stop-work authority clear

    does the officer halt dangerous work alone or escalate.

  3. 3

    Check the requirements

    ask the regulator which safety certificate is needed before making it a condition.

  4. 4

    State who the role reports to

    independence from production pressure protects its work.

08Safety officer description checklist before approval

6 items

09Frequently asked questions

  • Write it in the description if your policy gives that power for imminent danger, and say who is told afterwards.

  • Not before checking with the official body; keep it in square brackets or as a plus.

  • Better to a higher or independent line, so production deadlines do not lean on its reports.

  • Write it if your contracts carry a safety duty, and keep the detail in the contract annex.

  • On site, yes, under the company's contract with them, with safety conditions written into their contracts.

  • If covering more than one site, yes, or a transport allowance.

  • The officer makes sure trained first aiders and kits are available, and may be trained personally.

  • On findings closed on time, training completion, incident rate and near-miss reporting.

  • Yes, after replacing construction risks with forklift, high-bay storage and fire risks.

Related pages

Inside TAC HR

The safety officer description in TAC HR

TAC HR assigns inspection items and breaches as tasks in the task management service until they are closed, and the document archiving service keeps the employee papers and alerts before documents and medical insurance expire. Performance is reviewed in the cycles of the performance service with periodic follow-ups. Other descriptions and policies sit on the templates page.

Move this template's sections into the safety officer advert from the "New job" («وظيفة جديدة») screen in "Posted jobs" («الوظائف المعلنة»): each section has its field in the "Job description" («الوصف الوظيفي») tab, "Duties and responsibilities" («المهام والمسؤوليات»), then "Requirements" («المتطلبات»), then "Benefits" («المزايا»), and applicants then see the post on the careers page. The salary range belongs in "Job titles" («المسميات الوظيفية»), where a safety officer salary outside it is saved with a warning.

After hiring, the "End of probation" («نهاية فترة التجربة») date shows in the employee list, and the first review in "Performance management" («إدارة الأداء») is the end-of-probation review, so the safety officer's indicators written here are measured before confirmation.

  • Recruitment — A recruitment system that ranks applicants with written reasons and turns the accepted one into an employee file
  • Performance and development — A performance review system with weighted criteria and a result whose every point has a known source
  • Employee requests — An employee request system with an approval route per request type and a leave balance checked before approval