TAC HRTAC HR
A scene from a Saudi workplace
HR templates

Nitaqat and Saudization Compliance Policy Template

The Saudization rate does not change on the day of a decision but in the days of hiring, resignation and termination that came before it. A company that works out its rate once a year finds the red band when red can no longer be avoided, while one that follows it every month moves before the band changes. This policy turns monitoring from one person's initiative into a written procedure: who counts, when, and at what figure action starts. It is guidance that needs a legal review before adoption and is not legal advice.

Last reviewed
On this page

01What a Saudization policy is for, and who it covers

The policy covers what the company really controls: its data, its monitoring and its hiring plan. The Nitaqat formula and its limits are issued by the competent authority and change with the procedural guide, the year and the activity, so the policy copies no limit and refers to the Nitaqat calculator and to the establishment activity pages.

HR writes it with senior management and the recruitment lead, and the authorised body approves it. It applies to every hiring, termination or transfer decision that changes the number of Saudi or non-Saudi workers in the company, and to the workforce data from which the count is made.

02The Nitaqat and Saudization compliance policy text

[Company name]
Nitaqat and Saudization compliance policy
Version: [number]      Effective date: [date]

1. Purpose and scope
1. This policy governs the monitoring of the Saudization rate at [Company name] and the plan to reach and hold the target band.
2. It applies to hiring, termination and transfer decisions that change the number of Saudi and non-Saudi workers.

2. Responsibility
1. [The Saudization officer / HR manager] monitors the rate, prepares the monthly report and submits it to [senior management].
2. No decision to hire or terminate that touches a large number of workers is approved until its effect on the rate has been measured.

3. Monthly monitoring
1. Within the first [__] days of each month a report is prepared showing: the number of Saudis, the number of non-Saudis, the rate, and the band for the company's activity and calculation year.
2. The report compares the rate with the limit of the target band and with the limit of the lowest band, and shows how many Saudis are needed to reach or stay in the target.
3. Reports are kept for the last [__] months.

4. Target band and hiring plan
1. Senior management sets the target band for the year and approves a hiring plan saying how it will be reached: replacing a non-Saudi with a Saudi, hiring new Saudis, or both.
2. Jobs a Saudi can fill are advertised for Saudis first on terms that fit them, and the reason is recorded if one is filled by someone else.
3. The plan is recalculated after every hire or exit, not after the whole plan is complete.

5. Workforce data
1. HR updates each worker's data (nationality, start date, type of employment, wage) at every change.
2. The data is reviewed every [__] months against the official records and any difference is corrected at once.

6. How the band affects the company's services
1. HR checks the effect of the band on visa requests, change of occupation, work permit renewal and transfer of services before submitting any of them.
2. Renewals of work permits and residencies for non-Saudi workers are planned according to the current band and the conditions of the service.

7. Escalation
1. If the rate falls to within [__] points of the lowest band's limit, an urgent alert goes to senior management within [__] days.
2. If the band falls, a meeting is held to review the plan and decide the corrective action.

8. Review
1. The policy is reviewed every year and when a new procedural guide or a change to the Nitaqat formula is issued.

Approval
[Approver's name and title]      Signature: ________      Date: [date]

03The policy clause by clause

Clause 2: one owner with a named deputy

Monitoring that is spread over three people belongs to nobody. Place the responsibility with one person who knows it is his, name a deputy to take it over during his leave, and record in the report who prepared it and on what date. When senior management asks for last month's figure it then has an owner and a source.

Clause 3: the monthly report answers "how many do we need?"

A report that says "our rate is 20%" changes nothing. A useful report adds the number: how many Saudis are we short of the target band, and is replacement or hiring the closer route? That is why the clause calls for the gap to be worked out in headcount.

Clause 4: replacement and hiring are different calculations

Replacement keeps the total as it is, so the limit stays fixed. Hiring adds to the numerator and the denominator together and raises the limit slightly because the total workforce grew. The difference is explained in raising the Saudization rate. Write into the policy that the plan is redone after each step, because the limit moves.

Clause 5: the rate cannot survive a wrong nationality or date

A worker recorded with the wrong nationality or an incorrect start date changes the rate in a report and confuses the decision. The data here is part of compliance, not office housekeeping.

Clause 6: the band opens and closes services

According to the article on the services of each band, the services available vary between bands: visas, change of occupation, work permit renewal and transfer of services. Whoever plans new visas knows the band before submitting, not after being refused.

Clause 7: the warning distance before the band limit

It is not enough to tell management after the band has changed; a useful alert arrives while the company is still in its band. Write the distance in percentage points from the lowest limit at which the warning starts, and tie it to the size of the company: in a small company one resignation moves the rate by whole points, so it needs a wider distance than a large one.

04A worked example: a company of 30 workers in the 2026 calculation

A company in the activity "General wholesale and retail" has 6 Saudis and 24 non-Saudis. By the Nitaqat calculator's function:

ItemResult
Total workforce30
Rate20.00%
BandRed
Low green limit at this total31.65%
Replacement: non-Saudis swapped for Saudis4
Rate and band after replacement (10 Saudis and 20 non-Saudis)33.33% — Low Green
Hiring: new Saudis to reach Low Green6
After hiring (12 Saudis out of 36)33.33% against a limit of 32.10%

So in this example the company needs to replace 4 non-Saudis with Saudis to leave red with the total unchanged, or hire 6 new Saudis so that the total rises to 36 and the limit moves to 32.10%. The choice between the two depends on the company's need and on whether it has jobs held by non-Saudis that a Saudi can fill. The figures are illustrative inputs, and the limits come from the two functions of the Nitaqat calculator on our site, following the 2026 guide.

05When not to apply this policy

A company whose activity is not in the calculation

Some activities and entities are treated specially in the guide. Check your activity and entity in the activity pages before you adopt the policy's figures.

Situations governed by the competent authority's decisions

Any exemption, support programme or change in the formula issued by the competent authority comes before what the company writes, and the policy is updated to match it.

Terminations with their own grounds

Ending a contract has its own rules in the Labor Law and is not decided by its effect on the band. The policy reviews the effect so that the company decides knowingly, not so as to change the ground for termination.

06Hard cases and common mistakes

A replacement Saudi who does not take the job

A Saudi with the required qualification or at the pay offered may not be available. Record the recruitment attempts and why they failed, because written follow-up shows the company's seriousness and helps to reset the plan.

Relying on the rate from an out-of-date source

The figures in your reports may differ from those counted officially because of delayed registration or a different average. Compare your report with what the official channels show at least every three months.

Common mistake: hiring all at once at the end of the year

The calculation uses workforce averages, so hiring at the end of the year does not lift the average as early hiring does. Spread the plan over the months of the year.

Common mistake: forgetting the effect of resignations

A company that hires Saudis and then loses more of them to resignation than it adds stays where it was. Put expected resignations in the monthly report.

07Steps to adapt the policy to your company

  1. 1

    Fix the activity and entity by their official names

    Open the activity page and record its name as in the guide and the calculation year, because every figure follows them.

  2. 2

    Name the Saudization officer and a deputy

    Write who prepares the report and who approves it, with a deputy who acts in his absence.

  3. 3

    Tie the report to a fixed time

    Make it the first week of every month, in one format, so months can be compared.

  4. 4

    Tie the plan to the departments' needs

    Collect from each department the jobs a Saudi can fill and the dates they are expected to fall vacant.

  5. 5

    Write the alert levels

    Fix the warning distance from the lowest band's limit, who is told then, and within what time.

08Saudization policy checklist before approval

8 items

09Frequently asked questions

  • By its activity, its workforce size and the Saudi share in it. Try the Nitaqat calculator and see your activity page in the activity guide.

  • Replacement usually needs fewer Saudis because the total does not grow, but it requires jobs held by non-Saudis that a Saudi can fill. The example above compares the two routes.

  • Yes. The coefficients change with the procedural guide, the year and the activity, which is why the policy refers to the current guide and copies no limit.

  • According to the article on band services: requesting visas, changing occupations, renewing and issuing work permits, and transferring services to the company. The detail is in band services and visas.

  • By the competent authority's guide, not by what the policy writes. The policy asks that your data match the official records.

  • No. It measures the effect and organises the plan; choosing the candidate follows his competence and the job's requirements.

  • Monthly under the policy, and at once after any hire, resignation or termination that touches a noticeable number of workers. The limit moves with the total, and a plan worked out on last month's figures may not be enough today.

Related pages

Inside TAC HR

Saudization in TAC HR

In the recruitment service the "Recruitment analytics" («تحليلات التوظيف») screen shows a "Saudization effect" («أثر السعودة») card with the Saudi share among your current employees, then the share "if you hire a Saudi" and "if you hire a non-Saudi", and the same card appears when a job is set up, where "Saudis only" («للسعوديين فقط») sits under "Work status" («حالة العمل») so you can state your condition, which is measured against every applicant as a warning and not an exclusion. The card notes that your band in Nitaqat depends on the establishment's activity and size, so the limit and the band come from the Nitaqat calculator. Each employee's nationality is a field in the "Employee file" («ملف الموظف») and in the employee list export, so it can be reviewed in one report. In the document archiving service alerts for the end of a residency and a work permit arrive ahead of time so renewal can be planned against the band. Other templates are on the templates page.

  • Recruitment — A recruitment system that ranks applicants with written reasons and turns the accepted one into an employee file
  • Document archiving — Employee and company document archiving with expiry dates and a reminder before every renewal